L
Flying Bridge Waterjet Cutting Machine
Finjet L
Technical specifications
FinJet L-series is designed for flexible cutting in all environments. Flying bridge design enables the effective use of the machine from three different sides. No matter if you are running a small job shop or producing demanding parts 24/7, with L-series you will be able to correspond all needs of waterjet cutting.
- Cutting area: 1,5 x 3 – 2 x 15 m
- Z-axis: 200 / 300 mm
- Positioning accuracy: ± 0,08 mm/m
- Repeatability: ± 0,08 mm
- X and Y axis max speed: 15 / 40 m/min
- Cutting heads: 1 – 4, 2D
In FinJet L models, the movement of the waterjet cutting machine is executed on a X-axis with a helical precision rack and pinion and on the Y-axis with Ø 40 mm precision ball screws. High-quality B&R (ABB) servomotors are equipped with absolute measurement, which allows the machine to be started without the need for extra home run. The bearings of the sleds are always mounted on precision guides with four bearings and at sufficient distances to eliminate vibration. The machine’s mechanics are designed for durability and longevity in all conditions.
Since abrasive waterjet cutting machines are always exposed to at least abrasive and water, protection must be designed accordingly. In FinJet L models, the X-axis is always protected by a tight U-beam. The Y movement is protected by a round bell and the machine frame is covered to withstand extreme conditions.
Electrical and automation design on all FinJet waterjet cutting machines are planned and executed by Muototerä’s own personnel. This allows optimum compatibility between mechanical and automation components. A good waterjet cutting machine is made from quality components, but it is not enough on its own. All parts must work together seamlessly. The purpose of Muototerä is always to make the waterjet cutting machines perform better than the sum of their parts. In practice, this means collaborative design with mechanical and automation design, so they are executed simultaneously for best results.
The electrical cabinets in FinJet L models are always designed with closed circle cooling, which makes the electrical and automation components more durable and the waterjet cutting machine less prone to failures. The machine is controlled by Muototerä’s own interface for water cutting. The HMI (Human Machine Interface) is a 21.5 ”Full HD touchscreen with a powerful 1.91GHz processor. The user interface has been designed based on the user experience so that it is simple yet powerful, offering all the features needed for effective waterjet cutting.
High pressure components play a critical role in waterjet cutting. As it is a high pressure device (3800 – 6200 bar), the high pressure components are subjected to extremely heavy stress. In addition to the self-made components, Muototerä uses components from KMT Waterjet. High-quality components guarantee the reliability of the machine at all pressure levels.
All FinJet waterjet cutting machines can be connected to any high-pressure pump, including old ones already at the client’s site. Muototerä is an official distributor of KMT High Pressure Pumps and a Premium OEM Partner. Our high pressure pump product range can be found here
Finjet L
Available options & accessories
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum. sunt in culpa qui officia
Cutting head
Control & machine
High preassure pump accessories
Abrasive handling
Depending on the size and number of the cutting heads, 18-120 kg/h of abrasive sand is coming into the cutting table tank. The used abrasive and cutting waste is removed from the tank with pneumatic diaphragm pump, which circulates the water through the system.
Movable cutting surface that you can apply when cutting only with water.
Stainless steel lamellae are recommended for cutting of aluminum and stainless steel. The water jet tank is made out of stainless steel as well.
Guns make it easy to clean the plate and parts after cutting.
The sensor in the abrasive feeder monitors the abrasive feed status
Abrasive will be filled by hand to a pressure silo, which capacity is 200 kg. It give about 8 hours cutting time with one nozzle. Includes the screen. Silo is equipped with low level sensor generating warning message on CNC screen, when abrasive is low.
PLC controlled Automatic abrasive silo for easy operation. Easily accessible, the abrasive can be loaded even while cutting. Sensors in lower tank monitor abrasive availability and control lamp shows system’s status. Flashing lamp reminds you to fill up the storage tank.
Cutting tank
Safety
Applicable Industries
Waterjet cutting solutions for different industrial sectors
The undoubted advantage of waterjet cutting is versatility. The cutting method is suitable for environmentally friendly cutting of almost all materials, such as aluminum, steel, glass, stone, plywood, rubber, plastic, foam and food.
The operation model form Muototerä is based on fast, reliable and flexible service. We are always customer-oriented, which means that we can provide you with the service concept that suits you. So we’re not trying to get our clients in the same mold, but tailor our services according to needs.
H
Portal Waterjet Cutting Machine
FinJet H-series is designed for continuous heavy duty waterjet cutting. Its modular portal design enables numerous different variations so that every demanding need can be fulfilled. H-series can be equipped with several cutting heads including 5- axis bevel cutting units.
L
Flying Bridge Waterjet Cutting Machine
FinJet L-series is designed for flexible cutting in all environments. Flying bridge design enables the effective use of the machine from three different sides. No matter if you are running a small job shop or producing demanding parts 24/7, with L-series you will be able to correspond all needs of waterjet cutting.
P
Pure Waterjet Cutting Machine
When cutting soft materials, such as plastic, foam, rock wool, rubber or plywood, abrasive can be left out from the cutting process. This enables faster movements and system can be optimized for pure waterjet cutting.
S
Compact & Capsulated Waterjet Cutting Machine
This is a plug-and-play waterjet cutting machine for quick installation and commissioning. Despite its small size, it is a compact waterjet machine for demanding cutting applications, based on the FinJet H Series.
R
Robot Waterjet System
FinJet R-series covers wide range of robot integrated waterjet cutting systems. Waterjet robot is ideal solution when we are aiming for maximum automation of the cutting process. FinJet R series is available for both water-only and abrasive waterjet cutting.
X
Client Customized Cutting System
Sometimes the cutting need is so exotic or demanding that normal waterjet cutting machines cannot offer the best solution. In this case, we make plan how to solve this. FinJet X offers a turnkey package: we plan and offer to solve the problem through the expertise brought by the experience.